亚洲av精选国产一区_日韩欧美在线一区二区中文_国产人成网站在线播放_日韩a级毛片免费视频_搡老女人老熟妇HHD_娇妻粗大高潮白浆国产_高清偷拍精品亚洲_日韩欧美一区二区丁香_91天堂素人约啪_91亚洲理论午夜

概述 （General）
本公司的PVG織物整芯阻燃輸送帶采用國內 技術，按照MT914-2008標準進行設計生產。
PVG覅特resistant solid woven conveyor beot beot supplied by Shanxi is produced with advanced technology introduced from England. Its design and production are procwssed in accordance with standard MT914-2008.The product quality achieves the international advanced standard.
2 結構（Stucture）
本產品采用化纖與棉編織的整體帶芯做骨架，經PVG糊浸漬，貼橡膠覆蓋層，硫化而成
The product consists of woven fabric dipped in PVG paste and rubber covers which are combined together by vulcanizing.
3 用途 （Application）
供煤礦井下及其它要求阻燃靜電的場合輸送物料
For conveying materials in underground coalmines and under other conditiond where fire resistant and antistatic properties are required.
抗?jié)窕�性�?爬坡性能優異 Anti slide caused by wetness,good climbing capacity
耐低溫 Low-temperature resistant
彈性好 抗沖擊 Good elasticity ,anti-impact
定負荷伸長小 適合于長距離輸送 Low elongation at rated load,suitable for long distance conveying
抗撕裂、 耐屈撓性好 Tear resistant,good flexing capacity
使用壽命長 Long service life

注：我們建議客戶根據運輸物料種類，粒度及其磨耗性的大小等因素來選擇不同的蓋膠。
Note；We suggest that the client should choose cover thickness according to the type the conveyed materials,granule,magnitude of the abrasion etc.
4、主要物理性能技術參數(Main physical propenties)

5橡膠覆蓋層的物理機械性能
Mechanical properties of covers

6粘合強度(Adhesion strength)

7主要安全性能(Main safety propertied)
（1）表面電阻值：≤3x10⁸Ω
（2） 滾筒摩擦性能:滾筒表面溫度≤325℃,并要求不出現有焰燃燒或無焰燃燒。
（3）酒精噴燈燃燒性能:
具有覆蓋層的試件:平均值≤3.0S 單值≤10.0S
剝?nèi)ジ采w層的試件:平均值≤5.0S 單值≤15.0S
（4）巷道丙烷燃燒性能：未燃燒保留長度>250mm
(5)高能量巷道丙烷燃燒試驗：完全度無損壞長度段>2250mm
8 運輸和貯存（Transportation and storage）
a. 本產品在運輸和貯存中應保持清潔，避免陽光直射、雨雪浸淋；紡織與酸、堿、油類、增塑劑等影響產品質量的物質接觸，并距離熱源1米以外；貯存環境溫度保持在0~35℃之間、相對濕度在20~70℃之間為宜；且應成卷放置、不得折疊，每季度翻動一次。
b.本產品的搬運宜采用叉車，在搬運時注意不得將帶子外圈損傷；無搬運機械，地面平整不至于損傷帶子時亦可以滾動搬運；吊裝搬運時推薦按圖1進行，符合條件（使用具有足夠強度的織物繩索）時也可以按圖2進行，但不得出現圖3所示的操作。
a .The prodct should be kept from sun irradiation .snow or rain and preveted from touching with acid,alkali,oil,plasticizer or other materials that would influence its quality.Kept at least 1meter away from heat sources .The storing tempe ratute should be keep within0~35℃,and the telative moisture with 20~70℃.Theproduct should be stored in reels and turned over once every quarter.Dont fold it.
b.Use fork truck for transiting.;Be careful not to damage the outer circle of the belts .when transiting machines.The method show in figure 1 is recommended when transit the belts by suspending them. The method in figure 2 is also acceptable(when the used fabric rope is strong enough )and operation show in figure 3 must be avoided.